Currier Tech Scoot-E DD Series Owner's Manual download pdf (Page 49)

DERAILLEUR GEARED BICYCLES

Includes 20", 24” and 26" Wheel Mountain Bikes

assembly is the same for men’s and women’s bikes.

Getting Started

Open the carton from the top and remove the bicycle. Remove the

straps and protective wrapping from the bicycle. Inspect the bicycle

and all accessories and parts for possible shortages. It is recommended

that the threads and all moving parts in the parts package be lubricated

prior to installation. Do not discard packing materials until assembly is

complete to insure that no required parts are accidentally discarded.

Assemble your bicycle following the steps that pertain to your model.

Note: Your bicycle may be equipped with different style components

than the ones illustrated.

Handlebars

Remove the protective cap from the handlebar stem wedge and loosen

the Allen key bolt using the 6mm Allen key. Some models may use a

13mm hexagonal bolt instead of an Allen key bolt. Place the handlebar

stem into the top of the head tube, ensuring that all cables are free of

tangles. Tighten the stem bolt observing the minimum insertion mark and

checking that the forks and the handlebars are facing forward. Check

the headset for smooth rotation and that the top nut is secured tightly.

Loosen the 6mm Binder Bolt and rotate the handlebar forward so the

levers are at a 45 degree angle below the handlebar. Retighten the

Binder Bolt to ensure the handlebar does not rotate in the stem.

Minimum Insertion

Mark

Stem Bolt

Head Tube

Binder Bolt

Top Nut

PART 4 - ASSEMBLY

Wedge

Warning: Over tightening the stem bolt or headset

assembly may cause damage to the bicycle and/or

injury to the rider.

We recommend that you consult a bicycle

specialist if you have doubts or concerns

as to your experience or ability to properly

assembly, repair, or maintain your bicycle.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 139 140

No comments

Currier Tech Scoot-E DD Series Owner's Manual Page 49